Chủ Nhật, 25 tháng 2, 2018

Công Tắc Dòng Chảy HFS-25

FLOW SWITCH

FEATURES 
The paddle type SPDT HFS series are designed to provide excellent performance where accuracy, reliability, and rugged constructiuon are
required in liquid flow lines carrying water for any fiuid neither harmful to 
brass and prosphor bronze nor classified as a hazaardous fluids.
They can be wired to close one circuit and open the other circuit when liquid flow either exceeds or drops below the adjusted flow rate.
The HFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on fluid bellow 0℃
These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres.
Flow switches are designed for use only as operating controls.
Since control failure can cause personal injury or property damage, users should use the monitoring system to alert control failure or the safety equipment.
  
  
DIMENSION 
 MODEL
CONNECTION 
L1 
L2 
L3 
 HFS-15
 79
  64 
  93 
  56 
R 1/2"(PT 1/2") 
  50 
 43 
 -
  28 
 HFS-20
 79
 64
 93
 56
 R 3/4" (PT 3/4")
 50
 43
  40 
 28
 HFS-25
 79
 64
 93
 56
 R 1" (PT 1")
 89
 59
 35
 28
SPECIFICATION 
 OPERATING PRESSURE
1.0 MPa (10bar) 
 WITHSTANDING PRESSURE
 1.75 MPa (17.5bar)
 INSULATION RESISTANCE
 Over 100Ω  (DC 500Vm)
 WITHSTANDING VOLTAGE
 AC 1500V / Min
 CONTACT POINT LIFE
 1000K Cycle
 BELLOWS LIFE
 500K Cycle
 TEMPERATURE of FLUID
 Max. 100℃  (212 ℉)

Không có nhận xét nào:

Đăng nhận xét